16:00 – 17:00 hours
Room: Palacio de la Canal #8
"Automotive Batteries with Powerframe Technology"
Johnson Controls (LTH Batteries)
Speaker: Juan M. Vazquez, Technical & Commercial Support Engineer
Juan M. Vasquez is in charge of technical and commercial training to Certified Dealers and Customer Service Centers.
Seminar Description:
Powerframe Technology Explanation, Technology in automotive batteries, Electrical system and the automotive battery, Battery components, Life of Batteries, BCI Explanation, Security suggestions about batteries, Diagnostic and Technical recommendations.

18:00 - 19:00 hours                                                     
Room: Valparaiso 2
“OBD I, OBD 2, EOBD, & CAN Automotive Systems, Explained In A Very Simple and Practical Way”
Injectoclean, S.A.
Speaker: Miguel A. Triana
Industrial Engineer. Master in the Science of Management from the Georgia Institute of Technology.
33 years of Experience in manufacturing, 19 years in Marketing. Presently the Director of Global Marketing for Injectoclean, the Mexico´s fastest-growing automotive electronics company.
Seminar Description:
Injectoclean will give a brief but detailed presentation of these automotive systems and the reason behind their creation. You will learn their meanings and applications and how you can benefit from this knowledge while faced with vehicle troubles at work.     

                                                        ***
top of page   


Thursday, July 12, 2007
10:00 – 13:00 hours
Casa Diezmo 3 & 4
“Real World Problems, Real World Fixes”
Precision International
Speaker: John Parmenter
John Parmenter is a hands on rebuilder and shop owner. He’s been collecting a varied menu of diagnostic and rebuilding tips from his shop that span a number of manufacturers and models.
Seminar Description:
This session is about real world transmission rebuilding, includes hand outs.

12:00 – 14:00 hours
Room: Casa Montejo 3 & 4
“Automotive Mechanical and Internet Challenges and Opportunities”
CEDVA Grupo
Speaker: Alvaro Pinette Bonilla
Ing. Alvaro Pinette Bonilla was born in Mexico City in 1965. He was a distinguished student of Centro Educativo Grupo Cedva, in high school and mechanical school. He is an Industrial Mechanical Engineer, by the Universidad Nacional Autonoma de Mexico and a lawyer by the Centro Universitario del Estado de Mexico (Grupo CEDVA)
He teaches in the mechanical are, due to the performance of it functions. He was promoted as principal of the Ecatepec campus and various departments with in Grupo CEDVA.
He is currently the chairman of Centro Educativo CEDVA Corporation, General Manager of the automotive technical support and the virtual automotive mechanical divisions.
He has three certificates of ASE (Automotive Service Excellence): Engine, Adjustment and Fuel Injection. He has joven conferences in different fórums of the mechanical industry, among others; such as SEMA in Las Vegas, FENATA (Federacion Nacional de Talleres Automotrices) and some manufacturers of autoparts.
Seminar Description:
The relationship that an automotive mechanic faces to find information about diagrams, procedures, interpretation of codes, in reliable sources, and the way it reverberates in the response times with the clients.
In other hand, the resistance of the automotive mechanics to the technologic advances, and how they can take advantage of the internet to optimize the resources and to offer and opportune and effective service to the clients.

13:00 – 15:00 hours
Room: Casa Diezmo 2
“The Booming Specialty Equipment Market in Mexico”
SEMA (Specialty Equipment Market Association)
Speaker: Gustavo Iberra & Sergio Odgers
Seminar Description:
Join Mexican experts and learn about the latest trends in the Mexican specialty market. We will show new ways to improve your profits and increase sales with high margin products.

16:00 - 17:00 hours
Room: Palacio de la Canal #8
"Automotive Filters"
Johnson Control (Battery Group)
Speaker: Xavier García, Technical & Commercial Support Engineer
In charge of technical and commercial filter training to Certified Dealers and Customer Service Centers
Seminar Description:
Filtration 101, Filter operation, Diagnostic and common problems in Automotive Filters.  

18:00 – 19:50 hours
Room: Valparaiso 2
Seminar 1 -
“PRESENTATION OF THE CJ-4 ….. THE LATEST AUTOMOTIVE DIAGNOSTIC SCANNER FOR OBD II, EOBD and CAN, THAT ALSO INCLUDES AUTOMOTIVE OSCILLOSCOPES AND OTHER IMPORTANT ACCESSORIES. "The future of automotive diagnostics equipment, today"  4-Year warranty, the highest in the automotive electronics Industry.”
Seminar 2 –
“OSCILLOSCOPES…… A GREAT NEED, NOT A LUXURY ANYMORE.  WHAT YOU NEED TO KNOW ABOUT ITS USE AND BENEFITS.”
Injectoclean, S.A.
Speaker: Miguel A. Triana
Industrial Engineer. Master in the Science of Management from the Georgia Institute of Technology.
33 years of Experience in manufacturing, 19 years in Marketing. Presently the Director of Global Marketing for Injectoclean, the Mexico´s fastest-growing automotive electronics company.
Seminar 1 -
Winner of the 2003, 2004, 2005 and 2006 Automotive National Quailty Award
We will present the Injectoclean´s newest, state-of-the-art product, that has a powerful scanner and an oscilloscope integrated in one unit. This equipment makes the technician’s job a lot easier and safer, less expensive and leave a high degree of satisfaction, both to the customer and to the technician.
Seminar 2 –
We will teach, step by step, the use of the Oscilloscopes in general and its applications in the shops.

18:00 – 20:00
Room: Casa Montejo 1
 “Manufacturing Technique for Parts of Suspension and Direction”
SANKEI INDUSTRY CO., LTD.
Speaker: Mr. Yoshimoto
Description: N/A

                                                   ***
top of page


Friday, July 13, 2007
09:00 – 13:00 hours
Room: Casa Montejo 1, 2, 3, 4
“JATCO – JF506E Repair & Rebuild Procedures”
Alto Products Corp.
Speaker: Noe Gomez
Noe has a Degree in Automobile Mechanics with a specialization in Automatic and Standard Transmissions. He has Certifications from DINA Nacional, Canacintra de Mexico, Ricks College Institute, and Brigham Young. Noe was an independent shop owner with over 20 years experience in repairing and teaching in an Automotive Technical Institute.
Description:
Up to date information on the proper identification, repair, and rebuild of this very popular unit. Technical service bulletins and pertinent information to properly service the JF506E are contained in this presentation.

10:00 – 14:00 hours
Room: Palacio de la Canal 7
Seminar 1 -
“AERA Shop Financial Analyzer Presentation”
Seminar 2 –
“Introduction to Engine Balancing”
AERA
Speaker: Domingo Gonzales
Domingo is AERA’s current 1st Vice Chairman and has been elected to assume the Chairmanship position July 1, 2007.   He has served in the capacity of AERA Director for various years in addition to contributing countless hours to community service.    He is the owner and operator of Pan American Machine Shop, Pharr, Texas, USA.  As an ASE certified machinist, he has gained international recognition for his expertise in the field of aluminum welding.  After 25 years in the machine shop business, he is familiar with all aspects of operating a machine shop from keeping pace with demands of a rapidly changing industry to the production of quality engines.  His specialty lies in producing unique high- performance engines with innovative cutting edge modifications that squeeze the maximum horsepower from stock engine parts.
Description:
Seminar 1 -
AERA will introduce new profit calculation software called the “Shop Financial Analyzer”.  This calculator was developed by a shop owner with the express purpose of knowing the financial condition of his business.  This calculator is easy-to-use and before you leave the conference, you will have a better grasp of your profitability and what you can do to improve it.  At the end of the session, every AERA member in the attendance will be given a FREE CD with the Shop Financial Analyzer software.
Seminar 2 -
Balancing of crankshaft and internal engine parts.

11:00 – 14:00 hours
Room: Casa Diezmo 1,2,3,4
“Automatic Transmissions: Common Problems and Practical Solutions”
Lubegard by International Lubricants
Speaker: Reese Blalock
Description:
Common problem and practical solutions for GM, Ford and VW automatic transmissions.

12:00 – 14:00 hours
Room: Valparaiso 1
“Diagnostic Today – The Path To Profitable Diagnostics”
Dreyfus Global Trade, LLC
Speaker: Daniel Torres
Description:
Diagnostics Today presents the key elements needed for professional and productive diagnostics in the internal combustion engine, including the use of gas analyzer diagnostic tools. The diagnostic process, challenge and solutions will be addressed.

13:00 – 14:00 hours
Room: Valparaiso 3
“New automotive legislation impacts: Hybrid Vehicles and Tire Pressure Monitoring Systems”
Xray Solutions
New automotive legislation impacts: Hybrid Vehicles and Tire Pressure Monitoring Systems
Speaker: Daniel Molina Flores
Description:
Automotive legislation evolves continuously, and its impact requires automotive Service and Reparation procedures evolution. This seminary exposes two specific cases repercussion (Hybrid Vehicles & TPMS) and suggests how to confront its Diagnostics needs.

16:00 - 17:00 hours
Room: Palacio de la Canal #8
"Automotive Batteries with Powerframe Technology"
Johnson Control (Battery Group)
Speaker: Juan M. Vazquez, Technical & Commercial Support Engineer
Description:
Powerframe Technology Explanation, Technology in automotive batteries, Electrical system and the automotive battery, Battery components, Life of Batteries, BCI Explanation, Security suggestions about batteries, Diagnostic and Technical recommendations.

18:00 – 19:50 hours
Room: Valparaiso 2
“HOW TO START YOUR OWN BUSINESS OR TO MAKE THE EXISTING ONE MORE PROFITABLE.
A quick guide to successfully start a new business, in any industry. How to make your business a more profitable one and how to sell your products in other countries.”
Injectoclean, S.A.
Speaker: Miguel A. Triana
Juan M. Vasquez is in charge of technical and commercial training to Certified Dealers and Customer Service Centers.
Description:
Powerframe Technology Explanation, Technology in automotive batteries, Electrical system and the automotive battery, Battery components, Life of Batteries, BCI Explanation, Security suggestions about batteries, Diagnostic and Technical recommendations.

                                                      ***

top of page

For more information, please contact:

International
Messe Frankfurt, Inc.
1600 Parkwood Circle, Ste. 515
Atlanta, GA 30339, USA
Phone:     770.984.8016
Fax:         770.984.8023
E-mail:     paminfo@usa.messefrankfurt.com
Web:        www.usa.messefrankfurt.com

USA
William T. Glasgow, Inc.
10729 W. 163rd Place
Orland Park, Illinois 60467

Phone:    708.226.1300
Fax:        708.226.1310